Search In
Submit
Advanced Search
Close

Advanced search

Find products
with at least one of the words
with all of the words
with the exact phrase
without the words
priced from $ to $
in this category
Results 1 To 12 of 18 for w/strainer Sort By:
This search took 0.0681 seconds
Fuel Filters
Item #: 06-776
In-Line and In-Take Fuel Filters

Leatt GPX 5.5 Neck Brace
Item #: 17-209

From the biomedical engineers and medical staff of the Leatt® research labs comes a 100% new neck brace for 2014. We believe that the 5.5 neck brace is truly the most technologically advanced neck brace in the world. The CE certified 5.5 neck brace balances the needs of comfort, effectiveness and safety by allowing greater freedom of movement and adjustment to more closely meet the needs of top level racers whilst Leatt®’s commitment to safety ensures that key safety features pioneered by Leatt® are built into each brace.

The core of what makes our neck braces work is Alternative Load Path Technology (ALPT®) and for the ALPT to work optimally neck braces must fit correctly. The adjustability built into all Leatt® neck braces is not just for comfort, but to ensure a correct fit that assists in optimizing effectiveness of your neck brace. We believe that no other neck brace can be adjusted to fit riders as well as a Leatt®. The front and rear sliding SureFit adjusters can be set for your personal body shape, without tools, in less than 30 seconds. The brace can also be readjusted as necessary for growing kids or when worn with different apparel. To further optimize fit, the new and improved CoreFlex rear thoracic strut has an exclusive feature that allows it to be adjusted to 4 setting angles. This is done with a simple elastomeric bumper that can be set at 0, 5, 10 or 15 degrees in seconds.

The 5.5 has lowered side areas, below the ear, that increases comfort and wearability, especially on kids, smaller statured riders and riders with shorter necks. A simple pop off shoulder pad that can raise or lower your brace to suit your neck length or helmet rim profiles. Both the front and the back feature has the new split design that promotes broader dissipation of energy transmitted to the body and have new molded padding for greater comfort. The semi-rigid chassis is flexible and adjustable enough to fit most riders’ body shape while the structure remains rigid enough to help transmit energy during an impact while multiple engineered fracture points and crumple zones will bend or break away at pre-determined stress levels to help contribute to a riders’ safety. The new and improved CoreFlex rear thoracic strut is more comfortable than ever and still has the engineered fracture point at the top that allows it to break away in certain severe impacts. If broken this strut can be purchased as a replacement part and easily changed out. The strut is lined with the same soft padding as on all the surfaces that ride against your body and this protective padding is on the brace edges facing inwards towards the soft tissues of the neck. The injected foam padding is more durable and easier to clean than ever before and designed to accommodate custom sticker kits.


Wilwood Brake Pad
Item #: 08-233

These PolyMatrix disc brake pads are the most aggressive we have found. They are the same pads used on our Champ 440 machines working well with cool or hot brake discs. Will fit  the Arctic Wilwood caliper as well as the billet caliper. Sold as a set.

Quantity
Polaris 11 Series Weights
Item #: 07-432
Because of their unique profile, these weights pull much harder on the start and through the midrange. All weights are machined from solid steel except the 07-436 which is a molded part like standard Polaris weights. We recommend using a weight that is one to two grams heavier than your existing weights. They are sold individually and are bushed.

Leatt® GPX Offroad Trail Brace
Item #: 17-204

The least expensive version of the most popular and most trusted powersports neck braces in the world. The 2013 Trail brace is the newest version of what used to be called the Leatt Adventure brace. Because of the substantial improvements we’ve made to it we decided to change the name at the same time. Invented by trauma surgeon Dr. Chris Leatt the trail brace has a lower price than other Leatt braces but still has the same safety features. Alternative Load Path Technology (ALPT), wide range of fitting options, light weight, dual hinge system to aid in emergency removal and engineered fracture and crumple zones are just some of the reasons hundreds of thousands of riders and racers worldwide out the trust in Leatt neck braces. • 3-way adjustability for a personalized, comfortable fit. • New one piece CoreFlex rear thoracic strut for improved comfort and fit. • CoreFlex rear strut has an engineered fracture point for improved safety. • New Rear thoracic strut can be set to -5, -0, 5, 10, and 15 degrees for the perfect fit. • Chassis made of fiberglass reinforced polyamide resin. • Collarbone relief section. • Optional clear chest strap features new, improved design. • CE certified as Personal Protective Equipment 89-686-EEC. • Weighs only 800g (1.8 lbs). • Two sizes: S/M and L/XL. Small and Medium . To determine the correct size of brace for your body, please use the following rough fitment guide: Small: 4 - 16 years old (thin build) Medium: 16 years + (average to bigger build)

 

WAS $299.00

NOW $195.00


Billet Spot Caliper
Item #: 08-171A

We found a great replacement caliper for the 175 and 150 series Hurst Airheart brake calipers. This thing will even use the same brake pads as the 175. This all Billet caliper is lightweight, but heavy duty with stopping power. The supplied aluminum spacer allows the caliper to fit over your brake disc. Hose inlet is 1/8” NPT. The mounting holes are on 2 5/16" centers. Brake pads are sold separately.

Quantity
Camoplast Speed Run Track
Item #: 02-670

Approved for high speeds, this 15" x 121” track is a .250” thick belt with a smooth outer surface. The track pitch is 2.52”. Stainless steel wear plates are needed for your slides to ride on and help maintain the track integrity at high speeds. They are installed using .875” push through studs. We recommend using 192 plates. You should put one plate on the inside and one on the outside of the track which will allow you to run 4 studs per bar. Track weighs only 17 lbs.

Call for current Price 800-883-0294

Call To Order: (218) 782-2295
Involute Drive Sprockets
Item #: 02-507

UHMW drive sprockets for hex shaft manufactured by PPD. These 2.52” pitch sprockets fit most stock rubber tracks and the rubber tracks we offer. Approximate diameters are: 8 Tooth-6.20”, 9 Tooth-7.07”, 10 Tooth-7.75”.

Sold Individually.


13 Wide, 27mm-17 Spline, Aluminum Lower Gears
Item #: 05-599
These lightweight aluminum gears are 1/3 the weight of steel gears and significantly reduce rotating mass. The gears are strong enough to withhold a season of abuse in most racing circumstances. Try to use a gear ratio that allows for a tight chain. To help prolong the life of the gear, we recommend one ounce of Energy Release along with your chain lube. 5/8" Wide

Grass/Ice Suspension
Item #: 02-882A

The latest suspension that every calls about. There is no other suspension available that maintains traction in the rough as this can. Featuring a new array of suspension components from the front arm to the rear scissor, these suspensions sport two Fox Float Shocks and Dual rear Torsion Springs. We offer these with Wear Resistant Billet wheels or standard rubber wheels. Available in four lengths, 121”, 128”, 136” or 144”, these suspensions put you in the winners circle. (Wheel quantities are listed with suspensions.)

Note: Suspensions are built to order, please allow additional processing time prior to shipping.

Call To Order: (218) 782-2295
11 Wide, 1"-15 Spline, Aluminum Lower Gears
Item #: 05-540
Lightweight aluminum gears are 1/3 the weight of steel gears. This significantly reduces rotating mass freeing up that extra horse power and torque to produce quicker ET's. These gears will work on the lower shaft of most Arctic, Polaris and Yamaha. To help prolong the life of the gear, we recommend one ounce of Energy Release along with your chain lube. 11 Wide = 1/2" 13 Wide = 5/8"

13 Wide, 1"-15 Spline, Aluminum Lower Gears
Item #: 05-560

Lightweight aluminum gears are 1/3 the weight of steel gears. This significantly reduces rotating mass freeing up that extra horse power and torque to produce quicker ET's. These gears will work on the lower shaft of most Arctic, Polaris and Yamaha. To help prolong the life of the gear, we recommend one ounce of Energy Release along with your chain lube.


The following terms were added to your search to help improve the result. Click here to exclude these extra terms from the search.
      - w, strainer, we

Results found in pages for w/strainer
1. Privacy Policy
This Privacy Policy governs the manner in which Wahl Bros. Racing Inc. collects, uses, maintains and discloses information collected from users (each, a "User") of the http://www.wahlracing.com website ("Site"). This privacy policy applies to the Site and all products and serv ...[+]
2. Terms & Conditions
  Ordering Orders may be placed by phone, fax, e-mail, mail or on our website. Be sure to double check all information before submitting your order. Fax line is open 24 hours a day. Payment Wahl Bros. Racing accepts Visa, MasterCard, Discover and American Express credit cards as ...[+]
3. All About Wahl Brothers Racing
Racing has been a Wahl family tradition for 35 years. Beginning in 1968, Durmont Wahl was an active part of Team Arctic factory racing. He served as a factory technician for some of the Arctic racing heroes including Dave Thompson, Larry Coltom, Bob Elsner and Jim Dimmerman. His brother Dave Wahl st ...[+]
4. Catalog
We invite you to download our NEW 2017 Wahl Racing Catalog. (If the file does not open for you, you may need to download Adobe Reader)
5. Careers
We currently do not have any job openings at Wahl Bros Racing. Feel free to email or drop off your resume.

Similar Search Words

Your Recent Searches