Search In
Submit
Advanced Search
Close

Advanced search

Find products
with at least one of the words
with all of the words
with the exact phrase
without the words
priced from $ to $
in this category
Results 1 To 12 of 60 for studs Sort By:
This search took 0.0786 seconds
Competition Eliminator Studs
Item #: 04-599
A thin profile, heat treated alloy steel stud for all types of ice racing. It's a lightweight ice pick with a 30 degree point. The thread length is .370” for use on rubber tracks.

Drag Eliminator Studs
Item #: 04-444
This is a highly aggressive heat treated alloy steel with a sharp 30 degree point. Its body is extremely tapered for the penetration required for drag racing on the hardest ice. The threads are only .270” long so the stud will not interfere with suspension wheels on thin belted tracks. They work great on cleated tracks. 1/4"-20 thread, 48 pieces.

Steel Chisel Tooth Studs
Item #: 04-486
The race proven T-nut chisel tooth stud is the secret to winning grass and ice. Its flat blade penetrates and grabs the surface material for maximum traction. This is the most aggressive single point stud available and it works like a scooper stud but with much greater penetration. 1/4"-20 or 7mm Thread, 48 pieces.

Steel Hooker Eliminator Studs
Item #: 04-550

A short threaded (.160") stud for use in hooker plates. This stud is used on hard ice. Its 30 degree taper is for deep penetration. HCL-8000 is a chisel tooth stud.


Ice Pixx Studs
Item #: 04-402
The Ice Pixx by Stud Boy's thin profile and through-hardened strength make this stud a great choice for clean, hard, icy conditions. With its slender performance profile and 30 degree point, the Ice Pixx is light-weight while still maintaining outstanding penetration. .370” Thread length.

Stud Bolts
Item #: 04-678
Button head cap screws work great for replacing studs you may remove when fine tuning the handling on your oval machine. Use the 3/8" long bolts with the flat Wahl Bros. stud plates and the 1/2" long bolts with the Woody's plates. Stud Bolts (pictured) are used to fasten stud plates in cleated tracks.

Woody's Slim Eliminator Studs
Item #: 04-383
Slim tapered body to a 30 degree point. Aggressively penetrates the hardest ice. 1/4-20 thread with .270” thread length. Through-hardened, heat treated alloy steel. Use 3/4” or 1” Dished T-Nut.

Stud Cutters
Item #: 04-961
With this stud cutter there is no need to remove your studs. You can sharpen them right on the machine using a drill and this tool. It can accurately cut 30, 45 or 60 degree points. Its four chip-resistant, precision inserts can be rotated eight times for long lasting durability. Replacement inserts are available.

Stud Hole Drill
Item #: 04-711
The hollow drill for 1/4", 7mm or 5/16” studs cores a precise opening for installing studs. Use the 1/4" bit for the 1/4" & 7mm applications and the 7mm for 5/16” applications.

Woody's Push Thru Carbide Studs
Item #: 04-314
Gold Digger Carbide Traction Master sharp 60 degree carbide point for superb trail traction on hard pack snow and ice. Long lasting durability. 7mm studs come with 7/8" head, 5/16" studs come with a larger 1" head for use on rubber tracks with deep lugs. Sold with lock nuts.
Limited Quantities
Close Out Prices
No Returns

Woody's Carbide Wedge Stud
Item #: 04-360
While supplies last we will be carrying these heavy duty studs. This push thru carbide wedge penetrates deeper than standard wedges. The point of this wedge has 100% more carbide than conicle studs. Wedge has a larger diameter 1" head and a heavy duty 5/16" body for extra support on deep lug rubber track. Packages of 24 include support plates.
Limited Quantities
Close Out Prices


Woody's Titanium Studs
Item #: 04-139
The competition is tough! Woody's® Titanium studs give you the edge over the competition. The 30° Eliminator™ Woody's® Titanium studs are 53% of the weight of it's steel counterpart. 1.200", 7mm thread. TEL-1207 Sold by the piece only. While Supplies Last
Quantity

The following terms were added to your search to help improve the result. Click here to exclude these extra terms from the search.
      - stud, stud's

Results found in pages for studs
1. Tech Support
Technical Information Anti Stab Wheel Kit Instructions 16-124 LED Taillight Technical Bulletin Stud Length Chart Gear Ratio Charts etc. Chain Gear Application Charts No Slip Drive Sprocket Application Chart No Slip Drive Sprocket Installation Instructions 06-785A ...[+]
Related Categories For studs:

Similar Search Words

Your Recent Searches