Search In
Submit
Advanced Search
Close

Advanced search

Find products
with at least one of the words
with all of the words
with the exact phrase
without the words
priced from $ to $
in this category
Results 1 To 12 of 60 for studding Sort By:
This search took 0.1162 seconds
Custom Studding Template
Item #: 04-687

Available in three different widths, Wahl Bros. offers blank 2.52” Pitch studding templates that will allow you to configure your own template that you can save and keep for future use. We offer them for 13.5”, 14” and 15” wide tracks. Made of 16 gauge steel, these templates will last longer than the sled. Designed to allow you to first mark out your desired stud pattern, you can then drill holes through the template that allow you to mark the track easily and quickly. Come in 6-bar patterns.


Double Grand Digger Support Plates
Item #: 04-6508
Double Grand™ Digger® Aluminum for Single Ply Tracks The Double Grand™ Digger® support plate can only be used with the Grand Master stud. The addition of a dual configuration provides additional studding options in the middle belt. The Double Grand Digger is available in 12 and 48 piece packages.

IMPORTANT: Once a hole is drilled for a standard Digger support plate, you cannot re-stud the track using Angled Digger support plates.

3.29" Pitch Cleated Tracks
Item #: 02-440A
Wahl Bros. Racing has been a source for high performance track systems since 1981. They are Kevlar reinforced, allowing lightweight and maximum strength. Rail center is 7 1/2". A four stud per cleat pattern is left open for convenient studding. Rivet holes are 1/4". Track width is 15”. This is a Convolute drive system, meaning they are driven off of the cleats resulting in free wheeling, ultra fast acceleration. Guides ordered separately.

Triangle Digger Support Plates
Item #: 04-629
For the trail rider looking for added performance. When studding a track using these support plates, the unique shape generates less rotating resistance. Available in 7mm and 5/16” aluminum.

IMPORTANT: Once a hole is drilled for a standard Digger support plate, you cannot re-stud the track using Angled Digger support plates.

Competition Eliminator Studs
Item #: 04-599
A thin profile, heat treated alloy steel stud for all types of ice racing. It's a lightweight ice pick with a 30 degree point. The thread length is .370” for use on rubber tracks.

Flat Aluminum Stud Plates
Item #: 04-736

These flat stud plates work great on the 13 1/2” tracks where there isn’t room for a normal double stud plate on the outside belt. Increase the stud length .100” (in t-nut applications) as compared to a Woody’s Support Plate. Hole size is 1/4" with spacing as listed. Sold individually.


Woody's Grand Master Stud
Item #: 04-164
Grand Master™ NEW THE 1.325" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED. OEM TESTED AND APPROVED FOR SINGLE PLY TRACKS ONLY. Woody's Grand Master™ with a larger 1.200 head provides a larger anchor to distribute pressure over a wider area on the single ply track. The Grand Master™ is available in two stud lengths, 1.075. with standard nuts and the 1.325 with ALN2-4500 Big Nuts in package in quantities of 12, 24, 84 and 500.

Catapult Drag Stud
Item #: 04-410

This t-nut style drag stud offers superior traction off the line, on both grass and ice. The "Catapult" is the best combination of penetration and bite available for competition. With its flat pushing surface, the " Catapult absolutely launches your sled off the line, and really holds onto the track. Mix them with "Ice Pixx" to be prepared for icy conditions. Offered at Wahl Bros. Racing in a .750", .875" or 1.00" length, 1/4"-20 thread. 48 pieces per package.


Assassins Chisel Tooth Stud
Item #: 04-399
The "Assassins" chisel push-through stud by Stud Boy is the lightest available utilizing the 1/4"-28 thread and 3/4" head. Super penetration for both ice and grass. Available in 2 lengths. Sold in bags of 48.

Bender Stud Mates
Item #: 04-642
Its 45 degree angle lies flush against the track and the track lug holding the stud rigid for maximum traction. Available in one hole or two hole.

Drag Eliminator Studs
Item #: 04-444
This is a highly aggressive heat treated alloy steel with a sharp 30 degree point. Its body is extremely tapered for the penetration required for drag racing on the hardest ice. The threads are only .270” long so the stud will not interfere with suspension wheels on thin belted tracks. They work great on cleated tracks. 1/4"-20 thread, 48 pieces.

Steel Chisel Tooth Studs
Item #: 04-486
The race proven T-nut chisel tooth stud is the secret to winning grass and ice. Its flat blade penetrates and grabs the surface material for maximum traction. This is the most aggressive single point stud available and it works like a scooper stud but with much greater penetration. 1/4"-20 or 7mm Thread, 48 pieces.

The following terms were added to your search to help improve the result. Click here to exclude these extra terms from the search.
      - stud, stud's, studs

Results found in pages for studding
1. Tech Support
Technical Information Anti Stab Wheel Kit Instructions 16-124 LED Taillight Technical Bulletin Stud Length Chart Gear Ratio Charts etc. Chain Gear Application Charts No Slip Drive Sprocket Application Chart No Slip Drive Sprocket Installation Instructions 06-785A ...[+]

Similar Search Words

Your Recent Searches