Search In
Submit
Advanced Search
Close

Advanced search

Find products
with at least one of the words
with all of the words
with the exact phrase
without the words
priced from $ to $
in this category
Results 37 To 48 of 60 for stud Sort By:
This search took 0.0718 seconds
Carbide Grinder Stand
Item #: 04-997

This is the same machine we use to sharpen our skags. It is fully adjustable to match any angle that you may want your runners to be. Welding is required as legs are not attached for shipping. We recommend a 3/4 -1 H.P. grinder with a 7” x 1” green wheel. A silicon carbide grinding wheel, also known as a green wheel, is necessary for sharpening carbide.

Shipping Note: This item cannot ship USPS Express Mail International because of it's dimensional size.

Quantity
Tunnel Protectors
Item #: 02-071

Available in aluminum or plastic to fit most racing applications.


Custom Studding Template
Item #: 04-687

Available in three different widths, Wahl Bros. offers blank 2.52” Pitch studding templates that will allow you to configure your own template that you can save and keep for future use. We offer them for 13.5”, 14” and 15” wide tracks. Made of 16 gauge steel, these templates will last longer than the sled. Designed to allow you to first mark out your desired stud pattern, you can then drill holes through the template that allow you to mark the track easily and quickly. Come in 6-bar patterns.


Woody's Big Nut
Item #: 04-1371
The aluminum Big Nut with a nylon insert provides added support to longer length studs. It is available in two sizes. Use ALN2-7000(04-137 or 04-138) for studs longer than 1.450". Use ALN2-4500(04-134 or 04-136) for 1.175 to 1.450" stud lengths. Packaged in quantities of 24 or 96 pieces . The short Big Nut is 1/2" long while the longer Big Nut is 3/4" long. NEW--Stud lengths of 1.325" and 1.450" are packaged with ALN2-4500 Big Nuts. The 1.575" and 1.740" studs are packaged with the taller ALN2-7000.

Wide Body Chisel Tooth
Item #: 04-493
With a 37% increase in flat surface grabbing area over standard chisels, this stud has proven itself in the field to be a must for winning drag races. The hardened, flat steel blade penetrates and grabs in soft or loose track conditions. The length is 1.060”, making them legal for use on .525” tracks. T-nut style, the thread is 7mm and they come in packs of 48 pc.
Quantity
Shim Washers
Item #: 04-650
Use these shim washers to fine tune desired stud height. For 1/4” studs, use aluminum shims. For 7mm studs, use the steel. 48 shims per package. .063" thick

Triangle Digger Support Plates
Item #: 04-629
For the trail rider looking for added performance. When studding a track using these support plates, the unique shape generates less rotating resistance. Available in 7mm and 5/16” aluminum.

IMPORTANT: Once a hole is drilled for a standard Digger support plate, you cannot re-stud the track using Angled Digger support plates.

Square Aluminum Support Plates
Item #: 04-630
Aluminum plates give excellent support with less weight. 7mm aluminum plates are .125” thick and the 5/16” aluminum plates are .145” thick. Strong, dependable and great for knocking off some extra track weight!

IMPORTANT: Once a hole is drilled for a standard Digger support plate, you cannot re-stud the track using Angled Digger support plates.

Angled Support Plates
Item #: 04-645
Placed at a 7 degree angle for effortless penetration and support. This new line of Woody's aluminum angled support plates is designed for grass drag and ice racing alike. Available in both 7mm and 5/16”.

IMPORTANT: Once the off-set hole is drilled for an Angled Digger support plate you cannot re-stud the track using regular (non-angled) Digger support plates. Also, once a hole is drilled for a standard Digger support plate, you cannot re-stud the track using Angled Digger support plates.

Eliminator Steel Traction Masters
Item #: 04-504
A unique 30 degree point penetrates the hardest ice. This narrow profiled push-through stud is designed for all competition requirements. The 1.200” length has 7 mm threads and a larger 7/8” head to combat torque loads.

3.29" Pitch Cleated Tracks
Item #: 02-440A
Wahl Bros. Racing has been a source for high performance track systems since 1981. They are Kevlar reinforced, allowing lightweight and maximum strength. Rail center is 7 1/2". A four stud per cleat pattern is left open for convenient studding. Rivet holes are 1/4". Track width is 15”. This is a Convolute drive system, meaning they are driven off of the cleats resulting in free wheeling, ultra fast acceleration. Guides ordered separately.

Round Support Plates
Item #: 04-634

Round dome shaped plates in aluminum. Available in 7mm or 5/16".

IMPORTANT: Once a hole is drilled for a standard Digger support plate, you cannot re-stud the track using Angled Digger support plates.


The following terms were added to your search to help improve the result. Click here to exclude these extra terms from the search.
      - stud's, studs

Results found in pages for stud
1. Tech Support
Technical Information Anti Stab Wheel Kit Instructions 16-124 LED Taillight Technical Bulletin Stud Length Chart Gear Ratio Charts etc. Chain Gear Application Charts No Slip Drive Sprocket Application Chart No Slip Drive Sprocket Installation Instructions 06-785A ...[+]
Related Categories For stud:

Similar Search Words

Your Recent Searches

- You have no recent searches -