Search In
Submit
Advanced Search
Close

Advanced search

Find products
with at least one of the words
with all of the words
with the exact phrase
without the words
priced from $ to $
in this category
Results 1 To 12 of 53 for stud Sort By:
This search took 0.071 seconds
Woody's Grand Master Stud
Item #: 04-164
Grand Master™ NEW THE 1.325" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED. OEM TESTED AND APPROVED FOR SINGLE PLY TRACKS ONLY. Woody's Grand Master™ with a larger 1.200 head provides a larger anchor to distribute pressure over a wider area on the single ply track. The Grand Master™ is available in two stud lengths, 1.075. with standard nuts and the 1.325 with ALN2-4500 Big Nuts in package in quantities of 12, 24, 84 and 500.

Bender Stud Mates
Item #: 04-642
Its 45 degree angle lies flush against the track and the track lug holding the stud rigid for maximum traction. Available in one hole or two hole.

Flat Aluminum Stud Plates
Item #: 04-736

These flat stud plates work great on the 13 1/2” tracks where there isn’t room for a normal double stud plate on the outside belt. Increase the stud length .100” (in t-nut applications) as compared to a Woody’s Support Plate. Hole size is 1/4" with spacing as listed. Sold individually.


Catapult Drag Stud
Item #: 04-410

This t-nut style drag stud offers superior traction off the line, on both grass and ice. The "Catapult" is the best combination of penetration and bite available for competition. With its flat pushing surface, the " Catapult absolutely launches your sled off the line, and really holds onto the track. Mix them with "Ice Pixx" to be prepared for icy conditions. Offered at Wahl Bros. Racing in a .750", .875" or 1.00" length, 1/4"-20 thread. 48 pieces per package.


Assassins Chisel Tooth Stud
Item #: 04-399
The "Assassins" chisel push-through stud by Stud Boy is the lightest available utilizing the 1/4"-28 thread and 3/4" head. Super penetration for both ice and grass. Available in 2 lengths. Sold in bags of 48.

Outlaw 600 Stud
Item #: 04-260
The only stud allowed in the Outlaw 600 class. This is a 55 degree sharpened carbide push through stud, 7mm with a 1" head. Use along with the 04-634 or 04-635 backing plates. 48 pieces per package.
Quantity
Woody's Trigger Stud
Item #: 04-495

Trigger™-Woody's® New Lake Racer Stud The Trigger™ has a long and narrow profile for unmatchable penetration on lake ice. The 1.630" stud has a 5/16" shank with Woody's sharp 60° carbide tip. The overall installed height is 1.88". Woody's Big Nuts are included in the packages of 48 pieces. When using this stud you must confirm you have enough tunnel clearance and install tunnel protection. Competition Use Only.

Quantity
Stud Bolts
Item #: 04-678
Button head cap screws work great for replacing studs you may remove when fine tuning the handling on your oval machine. Use the 3/8" long bolts with the flat Wahl Bros. stud plates and the 1/2" long bolts with the Woody's plates. Stud Bolts (pictured) are used to fasten stud plates in cleated tracks.

Flat Carbon Fiber Stud Plates
Item #: 04-804

These flat stud plates by Patrick Custom Carbon are made of carbon fiber material that is up to 5 times stronger than aluminum and nearly half the weight. As with our flat aluminum plates increase stud length .100” as compared to a Woody’s support plate. Hole size is ¼”. Sold individually.


Woody's Gold Digger Carbide Stud
Item #: 04-116
This 80 degree stud has a larger diameter carbide pin which will last longer. Four lengths allow use on regular and deep lug tracks. T-nuts are included in packs of 24 only.
Limited Availability
Close Out Prices!
No Returns

Woody's Arrow Wedge Carbide Stud
Item #: 04-330
This 7mm stud has a long history of success in Woody's line. A larger carbide wedge is brazed into a steel body for deep penetration. Position the wedge in line with sled travel and the stud will aid in cornering control. Rotate the wedge 90 degrees and the stud hooks up for starting and stopping traction. Or use a combination of positions in your track.
Limited Quantities
Close Out Pricing
No Returns

Stud Cutters
Item #: 04-961
With this stud cutter there is no need to remove your studs. You can sharpen them right on the machine using a drill and this tool. It can accurately cut 30, 45 or 60 degree points. Its four chip-resistant, precision inserts can be rotated eight times for long lasting durability. Replacement inserts are available.

Results found in pages for stud
1. Tech Support
Technical Information Anti Stab Wheel Kit Instructions 16-124 LED Taillight Technical Bulletin Stud Length Chart Gear Ratio Charts etc. Chain Gear Application Charts No Slip Drive Sprocket Application Chart No Slip Drive Sprocket Installation Instructions 06-785A ...[+]
Related Categories For stud:

Similar Search Words

Your Recent Searches