Search In
Submit
Advanced Search
Close

Advanced search

Find products
with at least one of the words
with all of the words
with the exact phrase
without the words
priced from $ to $
in this category
Results 1 To 12 of 60 for stud Sort By:
This search took 0.0846 seconds
Flat Aluminum Stud Plates
Item #: 04-736

These flat stud plates work great on the 13 1/2” tracks where there isn’t room for a normal double stud plate on the outside belt. Increase the stud length .100” (in t-nut applications) as compared to a Woody’s Support Plate. Hole size is 1/4" with spacing as listed. Sold individually.


Woody's Grand Master Stud
Item #: 04-164
Grand Master™ NEW THE 1.325" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED. OEM TESTED AND APPROVED FOR SINGLE PLY TRACKS ONLY. Woody's Grand Master™ with a larger 1.200 head provides a larger anchor to distribute pressure over a wider area on the single ply track. The Grand Master™ is available in two stud lengths, 1.075. with standard nuts and the 1.325 with ALN2-4500 Big Nuts in package in quantities of 12, 24, 84 and 500.

Assassins Chisel Tooth Stud
Item #: 04-399
The "Assassins" chisel push-through stud by Stud Boy is the lightest available utilizing the 1/4"-28 thread and 3/4" head. Super penetration for both ice and grass. Available in 2 lengths. Sold in bags of 48.

Catapult Drag Stud
Item #: 04-410

This t-nut style drag stud offers superior traction off the line, on both grass and ice. The "Catapult" is the best combination of penetration and bite available for competition. With its flat pushing surface, the " Catapult absolutely launches your sled off the line, and really holds onto the track. Mix them with "Ice Pixx" to be prepared for icy conditions. Offered at Wahl Bros. Racing in a .750", .875" or 1.00" length, 1/4"-20 thread. 48 pieces per package.


Competition Eliminator Studs
Item #: 04-599
A thin profile, heat treated alloy steel stud for all types of ice racing. It's a lightweight ice pick with a 30 degree point. The thread length is .370” for use on rubber tracks.

Bender Stud Mates
Item #: 04-642
Its 45 degree angle lies flush against the track and the track lug holding the stud rigid for maximum traction. Available in one hole or two hole.

Steel Hooker Eliminator Studs
Item #: 04-550

A short threaded (.160") stud for use in hooker plates. This stud is used on hard ice. Its 30 degree taper is for deep penetration. HCL-8000 is a chisel tooth stud.


Drag Eliminator Studs
Item #: 04-444
This is a highly aggressive heat treated alloy steel with a sharp 30 degree point. Its body is extremely tapered for the penetration required for drag racing on the hardest ice. The threads are only .270” long so the stud will not interfere with suspension wheels on thin belted tracks. They work great on cleated tracks. 1/4"-20 thread, 48 pieces.

Steel Chisel Tooth Studs
Item #: 04-486
The race proven T-nut chisel tooth stud is the secret to winning grass and ice. Its flat blade penetrates and grabs the surface material for maximum traction. This is the most aggressive single point stud available and it works like a scooper stud but with much greater penetration. 1/4"-20 or 7mm Thread, 48 pieces.

Woody's Trigger Stud
Item #: 04-495

Trigger™-Woody's® New Lake Racer Stud The Trigger™ has a long and narrow profile for unmatchable penetration on lake ice. The 1.630" stud has a 5/16" shank with Woody's sharp 60° carbide tip. The overall installed height is 1.88". Woody's Big Nuts are included in the packages of 48 pieces. When using this stud you must confirm you have enough tunnel clearance and install tunnel protection. Competition Use Only.

Quantity
Outlaw 600 Stud
Item #: 04-260
The only stud allowed in the Outlaw 600 class. This is a 55 degree sharpened carbide push through stud, 7mm with a 1" head. Use along with the 04-634 or 04-635 backing plates. 48 pieces per package.
Quantity
Ice Pixx Studs
Item #: 04-402
The Ice Pixx by Stud Boy's thin profile and through-hardened strength make this stud a great choice for clean, hard, icy conditions. With its slender performance profile and 30 degree point, the Ice Pixx is light-weight while still maintaining outstanding penetration. .370” Thread length.

The following terms were added to your search to help improve the result. Click here to exclude these extra terms from the search.
      - stud's, studs

Results found in pages for stud
1. Tech Support
Technical Information Anti Stab Wheel Kit Instructions 16-124 LED Taillight Technical Bulletin Stud Length Chart Gear Ratio Charts etc. Chain Gear Application Charts No Slip Drive Sprocket Application Chart No Slip Drive Sprocket Installation Instructions 06-785A ...[+]
Related Categories For stud:

Similar Search Words

Your Recent Searches