Search In
Submit
Advanced Search
Close

Advanced search

Find products
with at least one of the words
with all of the words
with the exact phrase
without the words
priced from $ to $
in this category
Results 1 To 12 of 32 for strong Sort By:
This search took 0.0835 seconds
FXR Blade Race Helmet
Item #: 17-087

Hi-flow visor reduces lift at high speeds and protects from sun and roost // Extended rear diffuser transfers impact load to compatible neck braces // Nose guard design improves frost bite protection // Hygienically-treated, removable, washable comfort liner // Front chin bar easily integrates Breath Box or Anti-fog Mask // Eyeport engineered for seamless fit with Mission Goggle // Lightweight, super-strong billet aluminum visor screws

  • SNELL2010 from 1500g (XS-XL) NOTE: NO LONGER ISR LEGAL AFTER JUNE 2017
  • DOT & ECE (2XL Only- from 1300g)
  • "Super Lite" Composite Fiber Shell—constructed of Kevlar®, aerospace grade Carbon Fiber, & Fiberglass
  • Dual Density EPS Liner
  • 10 intake vents & 4 exhaust port

CLOSEOUT PRICING

WAS $269.99

NOW $150.00


Square Aluminum Support Plates
Item #: 04-630
Aluminum plates give excellent support with less weight. 7mm aluminum plates are .125” thick and the 5/16” aluminum plates are .145” thick. Strong, dependable and great for knocking off some extra track weight!

IMPORTANT: Once a hole is drilled for a standard Digger support plate, you cannot re-stud the track using Angled Digger support plates.

13 Wide, 27mm-17 Spline, Aluminum Lower Gears
Item #: 05-599
These lightweight aluminum gears are 1/3 the weight of steel gears and significantly reduce rotating mass. The gears are strong enough to withhold a season of abuse in most racing circumstances. Try to use a gear ratio that allows for a tight chain. To help prolong the life of the gear, we recommend one ounce of Energy Release along with your chain lube. 5/8" Wide

KOSO AC/DC Converter
Item #: 16-175

This small box made of aluminum will convert AC power in DC power. Its compact size and strong resistance make it the perfect power converter for all snowmobiles.

ELECTRICAL SPECIFICATIONS :

  • The input voltage range : 12 ~ 30v (AC / DC)
  • The output voltage range : DC 12 ~ 15v
  • Max load : 6W / 0.5 AMP
Quantity
15W Ski-Doo Aluminum Lower Gears
Item #: 05-605
These lightweight aluminum gears are 1/3 the weight of steel gears and significantly reduce rotating mass. The gears are strong enough to withhold a season of abuse in most racing circumstances. Try to use a gear ratio that allows for a tight chain. To help prolong the life of the gear, we recommend one ounce of Energy Release along with your chain lube.

PJ1 & Maxima Chain Lube
Item #: 09-310

Specially formulated not to fly off. These thin-bodied lubricants quickly cover the chain links, and then thicken to provide an exceptionally strong film, which lubricates and protects critical chain wear points.

(GROUND ONLY SHIPPING)


Universal Heavy Duty Flywheel Puller
Item #: 16-543

Pull tough flywheels with ease. Strong and built to last for years. This puller is designed with specially shaped slots that allow its use on all two-stroke snowmobile flywheel bolt patterns. Puller includes high quality grade 10.9 bolts, six 6mm and four 8mm.

Quantity
Cool Tape
Item #: 11-358

Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses.

  • Withstands direct heat up to 400°F and 2000°F radiant heat Flexible and easy to apply
  • Strong self-adhesive backing
  • Use to secure panels, seal air boxes, wrap wiring & more

Wear Resistant Aluminum Wheels
Item #: 02-691A
Want billet wheels that shine? How about billet wheels that can take the abuse that boondocking can inflict? Wahl Brothers billet, Wear Resistant wheels are the only billet wheels on the market that can take what racers and aggressive trail riders alike inflict. These 'Wear Resistant Aluminum Wheels' have rubber molded onto the aluminum wheel that protects the billet from studs and ice. A hefty durometer rubber combined with an adhesive so strong, the rubber will wear before the adhesive lets loose. This allows these wheels to be run on the studs at high mph without any wheel damage or performance hindrance. **All wheels come with bearing, circlip and billet inserts where applicable.

AC/Polaris HYVO Conversion Gears
Item #: 05-965

These HYVO steel gears will convert pre-'96 Polaris and pre-'04 Arctic Cat with 7/8"-13 spline to the stronger HYVO chain. The standard Polaris HYVO lower 1"-15 spline sprockets will complete both applications. For use with HYVO chain only. (May not be exactly as pictured)


TMX Racing Carburetor
Item #: 06-140

These Mikuni carbs feature a radial flat slide design that provides improved throttle response, along with a wider and stronger overall powerband. With increased sensitivity to tuning, very minimal changes are able to produce noticeable results. Uses standard VM type mounting flanges and most of the same tuning components. TMX 38 has a fixed needle jet equal to an R-1, 6EJ12-57 Jet Needle and 340 Main Jet.  Comes standard with a cable type choke. TMX 40.2 carbs are available by special order.

Quantity
3/4" Dished Head T-Nut
Item #: 04-666
Redesigned stronger and thicker to allow tighter thread tolerance. The 3/4" has a 1/4-20 thread. It is sold in packages of 48.

The following terms were added to your search to help improve the result. Click here to exclude these extra terms from the search.
      - stronger

Similar Search Words

Your Recent Searches