Search In
Submit
Advanced Search
Close

Advanced search

Find products
with at least one of the words
with all of the words
with the exact phrase
without the words
priced from $ to $
in this category
Results 13 To 24 of 57 for standard Sort By:
This search took 0.0737 seconds
TMX Racing Carburetor
Item #: 06-140

These Mikuni carbs feature a radial flat slide design that provides improved throttle response, along with a wider and stronger overall powerband. With increased sensitivity to tuning, very minimal changes are able to produce noticeable results. Uses standard VM type mounting flanges and most of the same tuning components. TMX 38 has a fixed needle jet equal to an R-1, 6EJ12-57 Jet Needle and 340 Main Jet.  Comes standard with a cable type choke. TMX 40.2 carbs are available by special order.

Quantity
Rubber Track Suspensions
Item #: 02-165A

These original lightweight suspensions fit any stock or race 116" to 156” rubber track. They are also available for the narrow Arctic Firecat Chassis. Using the same technology as our cleated track suspensions, you have adjustments to control ski pressure and weight transfer as desired. The dual torsion type adjustable front arm spring allows for smooth front arm movement, making it the quickest suspension available for rubber tracks. Rail centers are 9”. These suspensions are used on ice and snow applications. The slides can be removed and wheels can be added to offer separate purposes like grass or asphalt racing. The suspension comes complete with three plastic rear idlers, cross shafts, mounting brackets, standard slides and a front wheel kit. Any option desired can be installed before shipping. Some are listed with the exchange price. Please supply us with rider weight and type of machine. Note: Suspensions are built to order, please allow additional processing time prior to shipping.


Cherry Rivets
Item #: 14-446
These rivets have approximately double the shear and tensile strength of a standard steel pop rivet. For chassis work, these are the best choice. Once set, part of the splined steel mandrel stays inside the rivet for added strength. Also known as Cherry or Q-rivets. Package quantities are 25 and 100. Three different lengths are available. High Strength Blind Rivet, 3/16”, (.1875” OD)

Closed End Blind Rivet
Item #: 14-460
This rivet has a special solid end that is capable of sealing vapors and liquids. Once set, part of the mandrel stays in the rivet for added strength. This is an aluminum rivet with a steel mandrel. Strength is approximately the same as a standard steel pop rivet.

Woody's Grand Master Stud
Item #: 04-164
Grand Master™ NEW THE 1.325" PACKAGES HAVE THE ALN2-4500 BIG NUTS INCLUDED. OEM TESTED AND APPROVED FOR SINGLE PLY TRACKS ONLY. Woody's Grand Master™ with a larger 1.200 head provides a larger anchor to distribute pressure over a wider area on the single ply track. The Grand Master™ is available in two stud lengths, 1.075. with standard nuts and the 1.325 with ALN2-4500 Big Nuts in package in quantities of 12, 24, 84 and 500.

Woody's Grand Digger Square Plates
Item #: 04-6501
The Grand Digger™ single support plates are available in round or square aluminum. They are packaged in quantities of 12, 48 or 84. Designed for the 1.200" head of Woody's Grand Master Studs. You must use these support plates when installing Grand Master™ studs. (Round Plates listed separately)

IMPORTANT: Once a hole is drilled for a standard Digger support plate, you cannot re-stud the track using Angled Digger support plates.

Woody's Grand Master Round Support Plates
Item #: 04-6505
The Grand Digger™ single support plates are available in round or square aluminum. They are packaged in quantities of 12, 48 or 84.Designed for use with the larger 1.200" head Woody's Grand Master Studs. You must use these support plates when installing Grand Master™ studs. Round support plates are not recommended for 2.52 pitch tracks. (Square plates listed separately)

IMPORTANT: Once a hole is drilled for a standard Digger support plate, you cannot re-stud the track using Angled Digger support plates.

Polaris Steering Arm, Steel
Item #: 11-119

Polaris Steering Arm, Steel

Standard Indy steering arm. (Fits Formula F-500)

OEM #5220326-067

Quantity
Locking Tie Tool
Item #: 11-568

This effective tool is used to tighten Stainless Steel Locking ties (See 11-565, 11-566, 11-567) The tool saves time and hassle while providing professional looking results. Simply slide the tool on the end of any 1/4" nut driver, engage the tie and twist. This gets the tie nice and secure. Will fit on the end of any standard 1/4" drive extension so working in tight spaces is no problem. Works with all popular styles of stainlss ties up to 1/2" wide. Made from hardened tool steel and black oxide coated for years of trouble free use.

Quantity
Double Grand Digger Support Plates
Item #: 04-6508
Double Grand™ Digger® Aluminum for Single Ply Tracks The Double Grand™ Digger® support plate can only be used with the Grand Master stud. The addition of a dual configuration provides additional studding options in the middle belt. The Double Grand Digger is available in 12 and 48 piece packages.

IMPORTANT: Once a hole is drilled for a standard Digger support plate, you cannot re-stud the track using Angled Digger support plates.

Round Support Plates
Item #: 04-634

Round dome shaped plates in aluminum. Available in 7mm or 5/16".

IMPORTANT: Once a hole is drilled for a standard Digger support plate, you cannot re-stud the track using Angled Digger support plates.


Ultimax XS Racer 6-Pk
Item #: 07-0861

At the request of race teams, Ultimax XS belts are available in a factory matched set of six belts. Each belt in a 6-Pack is held to tolerances that are three times tighter than the standard XS belt and comes from the same production sleeve for the most repeatable performance anywhere. For complete fitment guide see our XS Belts sold individually.

10% Savings from Retail when purchasing individually.


Results found in pages for standard
1. Haulmark Trailers
Adventurer FVT (steel frame)Practical, hard-working design and side-by-side storage of up to four or more ATVs or snowmobiles are just a few of the many features of this professional grade trailer. From its heavy-duty components to its salt protective barrier, this trailer is designed from nos ...[+]

Similar Search Words

Your Recent Searches

- You have no recent searches -