Search In
Submit
Advanced Search
Close

Advanced search

Find products
with at least one of the words
with all of the words
with the exact phrase
without the words
priced from $ to $
in this category
Results 1 To 10 for so Sort By:
This search took 0.0645 seconds
Locking Tie Tool
Item #: 11-568

This effective tool is used to tighten Stainless Steel Locking ties (See 11-565, 11-566, 11-567) The tool saves time and hassle while providing professional looking results. Simply slide the tool on the end of any 1/4" nut driver, engage the tie and twist. This gets the tie nice and secure. Will fit on the end of any standard 1/4" drive extension so working in tight spaces is no problem. Works with all popular styles of stainlss ties up to 1/2" wide. Made from hardened tool steel and black oxide coated for years of trouble free use.

Quantity
Air Density Gauge, Digital
Item #: 06-861

Super accurate full digital Air Density Gauge. Easier to use than dial models.

  • Accurate electronic Air Density measurement with easy-to-read digital display Shows your baseline so you don't forget
  • A Red LED flashes to let you know if you need to change jets (air density changed by +/- 5%)
  • Also displays current temp and barometric pressure with the push of a button
  • Battery indicator on display
  • Auto shutoff

Air density or RAD (relative air density) is used as a valuable tuning tool to keep your jetting at its optimum. To use this gauge get a box of spark plugs and work on your jetting, reading the plugs as you go.

Quantity
Cleated Ice Suspension
Item #: 02-110A
Building stronger and easily tunable suspensions has always been a priority at Wahl Bros. New designed front and rear suspension arms are stronger, lighter and have less flex than the previous designs. The dual front limiter eye bolts increase your ability to adjust the straightness of your machine. Rail centers are 7 ½”. These frames come standard with an oil shock, two rear idlers, a front wheel kit and UHMW Slides. We'll install any other option you desire. Some are listed with the exchange price. Wheel kits designed for the grass work great in all minimal lube conditions. Please supply us with rider weight, type of machine and the intended use for proper spring selection. Cross shafts and mounting brackets are supplied, so please check the tunnel width of your machine.

Ramp Grinding Block
Item #: 07-286

Grind your weights on a Ramp Grinding Block. Holds three of any Comet, Polaris, Arctic or other weight at once so that they may be ground evenly.

Quantity
Drag Eliminator Studs
Item #: 04-444
This is a highly aggressive heat treated alloy steel with a sharp 30 degree point. Its body is extremely tapered for the penetration required for drag racing on the hardest ice. The threads are only .270” long so the stud will not interfere with suspension wheels on thin belted tracks. They work great on cleated tracks. 1/4"-20 thread, 48 pieces.

Wear Resistant Aluminum Wheels
Item #: 02-691A
Want billet wheels that shine? How about billet wheels that can take the abuse that boondocking can inflict? Wahl Brothers billet, Wear Resistant wheels are the only billet wheels on the market that can take what racers and aggressive trail riders alike inflict. These 'Wear Resistant Aluminum Wheels' have rubber molded onto the aluminum wheel that protects the billet from studs and ice. A hefty durometer rubber combined with an adhesive so strong, the rubber will wear before the adhesive lets loose. This allows these wheels to be run on the studs at high mph without any wheel damage or performance hindrance. **All wheels come with bearing, circlip and billet inserts where applicable.

TX-1 Recording Tachometer, In-Dash
Item #: 16-138
A Revolution in Gauge Technology! Designed especially for Sleds and ATV’s, this rugged built Tachometer is ready for this seasons aggressive runs. The TX-1 Records and Re-Plays the run for clearer, precise information. The Re-play offers selectable playback speed, Pause and rewind features, Cool Blue backlighting. A/C & DC operation make the TX-1 the perfect Tach. With a TX-1 Recording Tach you can: * Monitor and Record Engine RPM. * Recall Maximum RPM. * Scroll through the recorded run on the digital screen. * Record Run for a full 1, 5 or 10 minutes. Step through the stored run in real time or 1/3 time increments. * Control the gauge from a single, easy-to-reach push button to activate recording. * Record feature can be setup for a RPM threshold, to start recording at a designated RPM, so no recording time is lost. * Settable shift / warning LED light. * Pause run at any point or rewind & fast forward to examine run. * Examine run down to 1/hundredth of second. * Use in full daylight or complete darkness, at temperatures from above 130° F to below -20° F. * Shown w/ optional alarm light. * Battery not required SPECIFICS: Power~8-16v AC or DC Voltage Range~Operation Temperatures 130 degrees F to -20F Accurate~Digital stepper motor design proven in racing conditions Versatile~Only tach available to connect directly to distributor-less ignitions WITHOUT requiring any special tach adapter modules. This makes the installation much simpler than other instruments currently on the market. VOLTAGE REGULATOR REQUIRED (Item #16-152)

TX-1 Recording Tachometer, Pedestal Mount
Item #: 16-137

A Revolution in Gauge Technology! Designed especially for Sleds and ATV’s, this rugged built Tachometer is ready for this seasons aggressive runs. The TX-1 Records and Re-Plays the run for clearer, precise information. The Re-play offers selectable playback speed, Pause and rewind features, Cool Blue backlighting. A/C & DC operation make the TX-1 the perfect Tach. With a TX-1 Recording Tach you can: * Monitor and Record Engine RPM. * Recall Maximum RPM. * Scroll through the recorded run on the digital screen. * Record Run for a full 1, 5 or 10 minutes. Step through the stored run in real time or 1/3 time increments. * Control the gauge from a single, easy-to-reach push button to activate recording. * Record feature can be setup for a RPM threshold, to start recording at a designated RPM, so no recording time is lost. * Settable shift / warning LED light. * Pause run at any point or rewind & fast forward to examine run. * Examine run down to 1/hundredth of second. * Use in full daylight or complete darkness, at temperatures from above 130° F to below -20° F. * Shown w/ optional alarm light. * Battery not required SPECIFICS: Power~8-16v AC or DC Voltage Range~Operation Temperatures 130 degrees F to -20F Accurate~Digital stepper motor design proven in racing conditions Versatile~Only tach available to connect directly to distributor-less ignitions WITHOUT requiring any special tach adapter modules. This makes the installation much simpler than other instruments currently on the market. VOLTAGE REGULATOR REQUIRED (Item #16-152)

OUT OF STOCK-Special Order Only

See TX-2 Model Item #16-136

 

 

Quantity
Brower Timing System
Item #: 16-368

Brower Timing Systems is proud to introduce the all New Test Center Timing System. With Brower Timings dedication to portability and ease of use, the TC-System can all fit into a single lumbar pack making it the perfect tool for personal tuning and timing events. The TC-System is designed to capture and organize testing data so at the end of the day each racer will have a profile with all of the day's tests and results.

Features:

  • Wireless timing with a range of up to 1100 feet
  • Accuracy to the 1/1000th of a second Miles per hour and kph mode allows racers to measure speed and time
  • Users can add up to 9 splits and store up to 199 number identified racers in the TC-Timer memory.
  • With the TC-Timer USB all timer data can be downloaded to a computer with the TC-Results Center software and organized into racer profiles.

Included:

  • TC-Timer
  • Start TC-Photo Gate A & B
  • Finish TC-Photo Gate A & B
  • 4 or 6 Tripods (6" Tall)
  • Storage Lumbar Pack

(This kit is assembled specifically for snowmobile and motorsport applications. Will not work for track and field purposes)


K & N Service Items
Item #: 06-910

K & N cleaner & oil is designed to recharge any K & N air filter. It will restore air flow efficiency so that your K & N filter performs just like new. Sold individually or in kit form. Kit includes 6.5oz. aerosol Air Filter Oil and 12oz. of Air Filter Cleaner.


Results found in pages for so
1. Privacy Policy
This Privacy Policy governs the manner in which Wahl Bros. Racing Inc. collects, uses, maintains and discloses information collected from users (each, a "User") of the http://www.wahlracing.com website ("Site"). This privacy policy applies to the Site and all products and serv ...[+]
2. Terms & Conditions
  Ordering Orders may be placed by phone, fax, e-mail, mail or on our website. Be sure to double check all information before submitting your order. Fax line is open 24 hours a day. Payment Wahl Bros. Racing accepts Visa, MasterCard, Discover and American Express credit cards as ...[+]
3. Haulmark Trailers
Adventurer FVT (steel frame)Practical, hard-working design and side-by-side storage of up to four or more ATVs or snowmobiles are just a few of the many features of this professional grade trailer. From its heavy-duty components to its salt protective barrier, this trailer is designed from nos ...[+]
Related Categories For so:

Similar Search Words

Your Recent Searches