Search In
Submit
Advanced Search
Close

Advanced search

Find products
with at least one of the words
with all of the words
with the exact phrase
without the words
priced from $ to $
in this category
Results 1 To 12 of 60 for skis Sort By:
This search took 0.0789 seconds
Machined Billet Asphalt Skis
Item #: 03-234A

The newest asphalt ski from Wahl Bros features machined aluminum side plates with stainless steel countersunk fasteners. Utilizing the billet aluminum wheels with polyurethane outer band you won’t find a tougher ski. Rubber mounted ski hoops eliminate cracking. Width is 3”. Sold in pairs.
 

Quantity
Leaf Spring Drag Skis
Item #: 03-008A

These are the Wahl Bros. manufactured aluminum skis found on some of the fastest snowmobiles in the world. Each ski assembly weighs 4 pounds complete. Total length is 24” and the width is 4”.Sold individually.


Champ Extruded Skis
Item #: 03-070A
These extruded aluminum skis support the carbide much better than a plastic bottomed ski thus reducing ski chatter. The original (03-070A) Champ skis have a 1/2" flat groove bottom, are 17” long and are 3 1/4" wide. Spindle width is 2”. The wide (03-069A) style skis also have the 1/2" flat groove, are 17” long, but are 3 1/2" wide and allow for 3” Spindles. Carbides that fit best are Woody's 10” CSD-5060 (04-928) or the 14” CSD-5050 (04-956). Ski comes complete with hoop attached and stainless steel clips are included. Sold individually.

Wahl Asphalt Skis
Item #: 03-239A
Wahl Bros. has designed tough, lightweight aluminum skis for asphalt racing. Available with two or four wheels and in Aluminum or Black Powder Coat, these asphalt skis feature the newest wheel innovation available. Billet aluminum wheels with a high grade polyurethane molded on make for a wheel that can handle speed and friction like no other wheel available. The asphalt Skis with two wheels weigh 4 lbs. 2 oz. each, while skis with four wheels weigh 5 lbs 4 oz. each. NHRA & ISR approved. Sold in pairs. (Pictured are the 03-239A Skis w/four wheels)

PowerMadd Mini Ski
Item #: 03-418

These skis are the ultimate for Pro Stock and Open-Mod Drag racing. The high quality compression molded ski reduces weight while increasing strength and durability. Great for Grass Drag racing, these skis are also an excellent performance upgrade for all Mini Sleds. Some sleds may require fabrication in order to attach to the spindles. Order Saddle Kits and wear bars separately. (See Related Products Below) Sold in a pair.

Quantity
IFS Drag Ski
Item #: 03-014A
Extruded IFS aluminum drag skis are standard equipment on the Wahl Bros. Drag chassis. Each ski weighs 2 lbs. Total length is 24”, ski spindle width is 3” and is easily compatible with most sleds. Skis are complete but do not include wear bars and are sold individually.
Quantity
North Star Racing Skis, Assembled, pr.
Item #: 03-015A

Leaf spring oval racing skis built to withstand the abuse and punishment that a rough ice track will inflict. Stainless Steel leaf spring stabilizers are supplied for the front and rear of the leaf springs, along with a centrally located stabilizer. Sold in pairs and are completely assembled (not drilled for carbides). Assembled ski blank is 28" long with a 20" leaf spring. Sold in pairs.

Quantity
North Star Air Skis
Item #: 03-023A
The latest addition to the North Star Ski line up is the “Air” version. They incorporate the Fox Float shock with compression and rebound adjustment. The air setting, 50-300 psi, aids the stiffness of the leaf spring along with a 3-position compression lever adjuster. Rebound is adjusted with a dial featuring a dozen settings. Air pump is included. Sold per pair. Not drilled for carbides
Quantity
North Star Raptor Skis
Item #: 03-018A

Race proven North Star extruded aluminum skis with tough stainless steel spring mounting brackets and leaf spring support. Exclusive Raptor shocks feature 100% billet components, 5/8" nitride shaft and synthetic oil reducing chatter and control spring oscillation. Sold per pair. Not drilled for carbides.

Quantity
Northstar Ski Competition Carbide, 10''
Item #: 04-927

Specifically designed for the vintage Northstar Racing Ski's. This Woody's Competition Carbide features 10" of 60° carbide for serious oval racing. Sold in pairs.

Quantity
CSD-5050, 14'', Twin-Track Ski-Doo..(Competition Carbides), pr.
Item #: 04-956

CSD-5050, 14'', Twin-Track Ski-Doo..(Competition Carbides), pr.

Competition carbides are designed for serious oval racing. When used with heavily studded tracks, this carbide runner keeps the front end from “pushing” during high speed cornering. These top-of-the-line Woody's carbide runners have been race proven for serious competition. Wahl Bros. use the 04-928 or the 04-956  carbide on their Champ skis. Sold as pairs, all have 60 degree carbides.

Quantity
Mini Champ Skis
Item #: 15-120A

Extruded aluminum IFS Skis in 12” and a 20” stock length. Ski spindle width is 2 1/4” but can be adapted to Kitty Cat or Mini 120's. The ski comes complete with hoop. Sold individually. (Recommended carbide include Item #'s 04-595, 04-596 or 04-587)


The following terms were added to your search to help improve the result. Click here to exclude these extra terms from the search.
      - ski, ski's, skid

Results found in pages for skis
1. Tech Support
Technical Information Anti Stab Wheel Kit Instructions 16-124 LED Taillight Technical Bulletin Stud Length Chart Gear Ratio Charts etc. Chain Gear Application Charts No Slip Drive Sprocket Application Chart No Slip Drive Sprocket Installation Instructions 06-785A ...[+]
Related Categories For skis:

Similar Search Words

Your Recent Searches